Binito BT-101 Ceramic Tile Adhesive
Polymer-modified Type-1 C1T adhesive for ceramic tiles on internal floors and dry walls.
Internal Floors & Walls
Available in 20 kg bag & 40 kg bag
Covers 40 to 45 sq. ft. using a 6 mm notched trowel (varies depending on site conditions & tile size).
Plastered walls, concrete surfaces, cement screeds
Binito BT-101 is a factory-blended, single-component cementitious tile adhesive reinforced with polymer additives. It delivers outstanding grab and slip resistance, eliminating hollow sounds and tile debonding in interior living rooms, hallways, and bedrooms.
Key Features
Reliable Adhesion
Perfect for bonding ceramic tiles on both walls and floors.
Slip Resistant
Ensures tiles stay in place during vertical applications.
Easy Mixing
Requires minimal water to achieve the perfect consistency.
Consistent Performance
Offers smooth application and durable results.
Recommended Applications
Certified Physical & Chemical Compliance
Laboratory test values conforming to IS 15477:2019 Type-1 / EN 12004 C1T
| Property / Test Method | Standard Requirement | Typical Values |
|---|---|---|
| Tensile Adhesion (Dry Condition - Annex A Clause 5.1) | Minimum 0.50 N/mm² | 0.55-0.65 N/mm² |
| Shear Adhesion (Dry Condition - Annex B Clause 5.2) | Minimum 1.00 N/mm² | 1.05-1.20 N/mm² |
| Slip Resistance (Annex C Clause 5.5) | < 0.50 mm | 0.40-0.45 mm |
Mixing & Application Instructions
For a 20 kg bag, mix 4 to 5 liters of clean water.
For a 40 kg bag, mix 9 to 10 liters of clean water.
Gradually add the adhesive powder into water & mix until a smooth, lump-free paste forms.
Allow it to rest for 5-10 minutes before application.
Covers 40 to 45 sq. ft. using a 6 mm notched trowel (varies depending on site conditions & tile size).
